SPRITE / MIDGET INFO
For new and second hand parts, info or help of any kind try Paul Mead at Meacam Spridgetts tel.01793845757 they are very good.
OMNI-AUTO`S has done it's best to ensure that all the
information in this document is correct but accepts no liability for errors.
Should you find any errors or have any information not contained in this
document you think should be here please email us at
Sorry no link you have to type this in
Visit our Web Site http://www.omniautos.f9.co.uk/cars/ for downloads.
A40 Farina Club at http://www.a40farinaclub.org.uk
Austin-Healey Club at http://www.austin-healey-club.com/
SpriteSpot.com serves
as a complete online information source (including an extensive online
forum system) for the Austin-Healey Sprite & MG Midget enthusiast.
Parts Suppliers
http://www.ahspares.co.uk for AHSpares website
http://www.minimania.com for technical tips, parts and catalogues from Minimania USA and Mini-Spares UK
http://www.mossint.co.uk for the Moss website
http://www.petermayengineering.com
IGNITION
INSTRUMENTATION
MISC
TECHNICAL DATA
TO BE SORTED
CROSS REFERENCE CHART FOR SPRITES AND MIDGETS >74
ABBREVIATIONS
A_AUTOMOTIVE-PRODUCTS AE_APEC
B_BALCO BO_BOSCH BSL_BEARING-SERVICES
C_CHAMPION CB_CBS CH_CHRYSLER D_DIRECT
FD_FERODO GIR_ GIRLING G_GKN
I_INTERMOTOR K_KINGSEAL LM_Le-MANS-AUTOPARTS
LH_LOCKHEED LU_LUCAS M_MOPROD MC_MOTORCRAFT
N_NATIONAL MIN_MINTEX Q_QUINTON-HAZEL
R_RING RA_REMUS-AUTOMOTIVE S_SUPERA
SP_SPAX T_TOMIC W_WAXSTAT WI_WIPAC
U_UNIPART
A/F_ALSO FITS
> 76 - PRE 76
76 > - POST 76
___________________________________________________________
MISC
OMNI-AUTO'S HAS PRODUCED THE FOLLOWING PROGRAMS, THEY
ARE ALL WRITTEN IN DOS BUT WILL HAPPILY RUN IN ANY VERSION OF WINDOWS.
BALLAST CALCULATOR - PUT IN YOUR EXISTING CORNER WEIGHTS
AND BY ADDING BALLAST AMOUNT AND POSITION THIS WILL TELL YOU THE EFFECT
ON CORNER WEIGHTS AND FRONT/REAR, LEFT/RIGHT PERCENTAGES.
CORNER WEIGHT CALCULATOR - PUT IN YOUR EXISTING CORNER
WEIGHTS AND THIS WILL TELL YOU CORNER WEIGHTS AND FRONT/REAR, LEFT/RIGHT
PERCENTAGES. GIVE IT YOUR PREFERRED FRONT/REAR, LEFT/RIGHT BIAS AND IT
WILL TELL YOU THE CORNER WEIGHTS YOU REQUIRE.
INCLINED SPRING RATE CALCULATOR - PUT IN VERTICAL AND
HORIZONTAL DIFFERENCE IN MOUNTING POINTS TOGETHER WITH SPRING RATE AND
BUMP/DROOP AND IT WILL GIVE YOU VERTICAL TRUE SPRING RATE AT REST AND FULL
BUMP TOGETHER WITH TRUE VERTICAL RATES AND SPRING RATE TO ACHIEVE ORIGINAL
RATE AS VERTICAL RATE.
SPEED CALCULATOR - THIS USES TYRE SIZES (13x165/70) OR
ROLLING DIAMETER OR CIRCUMFERENCE TOGETHER WITH AXLE RATIO AND GEAR RATIO
TO GIVE SPEED PER 1000 REVS 1000-8000, SPEED AT SPECIFIC REVS
AND REVS AT SPECIFIC SPEED.
THROTTLE QUADRANT CALCULATOR - KEY IN YOUR CABLE PULL
AT THE PEDAL AND IT WILL GIVE YOU THE THROTTLE QUADRANT RADIUS (OR ARM
LENGTH IF THAT'S WHAT YOU USE). IT ALSO ALLOWS YOU TO CHANGE THE ANGLE
THE QUADRANT/ARM IS PULLED THROUGH.
ALL THESE PROGRAMS ARE AVAILABLE FREE FROM OUR WEB PAGE AT,
http://www.omniautos.f9.co.uk/cars/
Back to Main Index Return to top of page